بررسی رفتار رشد ترک تحت بارهای‌سیکلی در روبناساز‌ی یک فروند شناور تندرو آلومینیومی

[1] Beghin, D., “Fatigue of ship structural details,” Technical and Research Bulletin, Vol. 2, No. 31, 2006.

[2] Kramer, et al., “Fatigue of aluminum structural weldments,” Ship Stryucture Committee - SCC 410, May 2000.

[3] Lippold, J. C., “Welding metallurgy and weldability,” Ohio State University, Published by John Wiley & Sons, Inc, Hoboken, New Jersey Published simultaneously in Canada, 2015.

[4] Chirica, I., et al., “Fatigue sensitivity analysis of a ship structural detail,” International Conference on Diagnosis and Prediction in Mechanical Engineering Systems (DIPRE’09), 22-23 Oct. 2009.

[5] Ferraris, S., and Farinetti, V., “The problem on large high-speed craft and the comparison between the behavior of high tensile steel and aluminum alloy structures,” Journal of Ship Production, Vol. 24, No. 2, May 2008, pp.116–123.

[6] Khatami, M. R., “Static and dynamic structural analysis of aluminum craft deck structures, subjected to repeated impact load,” Latin American Journal of Solids and Structures, Received 26 May 2009.

]7 [خدمتی، محمدرضا، عدالت، پدرام، و نیک‌فرجام، موعود، «طراحی سازه کشتی»، تهران، دانشگاه صنعتی امیرکبیر، 1395.

[8] Dyachkov, V., and Makov, J., “Seakeeping of a fast displacement catamaran,” Transport: Vol. 20, No. 1, 2005, pp. 14-22.

[9] Van Deyzen, A., “A nonlinear mathematical model of motions of a planning monohull in head seas, Proceedings of the 6th International Conference on High Performance Marine Vehicles, Naples, Italy, 2008.

[10] Green, K., Dutch Applied Scientific Research Organization ,TNO., “Ship structural reliability in extreme conditions,” 2010.

[11] Dan, M., Kihyon, K., et al., “Fatigue performance assessment and service life prediction of high-speed ship structures based on probabilistic lifetime sea loads,” Structure and Infrastructure Engineering, Vol. 9, No. 2, Feb. 2013, pp. 102–115.

[12] رواجی، بابک، سروش‌نیا، سهیل، «آباکوس»، تهران، نگارش دانش، 1393.

[13] Xiang, Z., et al, “A simulation of fatigue crack propagation in a welded T-joint using 3D boundary element method,” International Journal of Pressure Vessels and Piping 80, 2003, pp. 111–120.

[14] Gregory, J, W., and Bilal, M, A., “Reliability-based fatigue design for ship structures,” Article May 1987.