تحلیلی بر فیزیک پدیده‌های هیدرودینامیکی پروانه نیمه‌مغروق الفسون (841-B)

[1]      Rose, C. J., Kruppa, C. F. L., and koushan, K., ‘‘Surface piercing propellers,” propeller/Hull interaction, [C]// FAST’93, 1993.

[2]      Olofsson, N., ‘‘A contribution on the performance of partially submerged propellers,’’ Proc FAST '93, Yokohama, Japan, Vol. l, 1994, pp. 765-776.

[3]      Shiba, H., “Air-drawing of marine propellers,” Technical Report 9, Transportation Technical Research Institute, 1953.

[4]      Hadler, J. and Hecker, R., “Performance of partially submerged propellers,” In the 7th ONR Symposium on Naval Hydrodynamics, Rome, Italy, 1968.

[5]      Wang, D., “Water entry and exit of a fully ventilated foil,” Journal of Ship Research, Vol. 21, 1977, pp. 44–68.

[6]      Kruppa, C. F. L., “Testing surface piercing propellers,” Marin Workshops on Advance Vessel Station Keeping, Propulsor-hull interaction & Nautical Simulators, Wageningen, 1992.

[7]      Olofsson, N., “Force and flow characteristics of a partially submerged propeller,” Chalmers University of Technology, 1996.

[8]      Miller, W. and Szantyr, J., “Model experiments with surface piercing propellers,” Ship Technology Research, Vol. 45, 1998, pp.14–21.

[9]      Dyson, P. K., “The modelling, testing and design of a surface piercing propeller drive,” PhD thesis, Departmentof Mechanical andMarine Engineering, Plymouth University, 2000.

[10]        Oberembt, H., “Zur bestimmung der instation¨aren fl¨ugelkr¨afte bei einem propeller mit aus dem wasserherausschlagenden fl¨ugeln,” Technical report, Inst.f¨ur Schiffau der Universit¨at Hamburg, Bericht Nr. 247, 1968.

[11]        Furuya, O., “A performance prediction theory for partially submerged ventilated propellers,” Journal of Fluid Mechanics, Vol. 151, 1985, pp. 311–335.

[12]        Wang, G., Jia, D., and Sheng, Z., “Hydrodynamic performance of partially submerged ventilated propeller,” Shipbuilding of China, Vol. 2, 1990.

[13]        Savineau, C., and Kinnas, S., “A numerical formulation applicable to surface piercing hydrofoils and propellers,” In 24th American Towing Tank Conference, Texas A&M University, College Station, TX,  1995.

[14]        Young, Y. L., Kinnas, S. A., ‘‘Analysis of super-cavitating and surfacepiercing propeller flows via BEM[J],’’ Computational Mechanics, Vol. 32, 2003, pp. 269–280.

[15]        Caponnetto, M., ‘‘RANSE simulations of surface piercing propellers,” Rolla Research, 2002.

[16]        Himei, K., “Numerical analysis of unsteady open water characteristics of surface piercing propeller, Third International Symposium on Marine Propulsors smp’13, Launceston, Tasmania, Australia, 2013.

[17]        Javanmardi, N., and Ghadimi, P., “Hydroelastic analysis of a semi-submerged propeller using simultaneous solution of Reynolds-averaged Navier–Stokes equations and linear elasticity equations,” Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 1475090217691864, 2017.

[18]        Ferrando, M., Scamarella, A., Bose, N., Lui, P., and Veitch, B., “Performance of a family of surface piercing propellers,” Royal Institute for Naval Architects (RINA), 2002.

[19]        Yari, E., and Ghassemi, H., “Hydrodynamic analysis of the surface-piercing propeller in unsteady open water condition using boundary element method,” International Journal of Naval Architecture and Ocean Engineering, Vol. 8, No. 1, 2016, pp. 22-37.

[20]        Brandt, H., “Modellversuche mit schiffspropellern an der wasseroberfläche Schiff und Hafen,”  Vol. 25, No. 5, 1973, pp. 415-422.

[21]        Katz, J., and Plotkin, A., “Low-speed aerodynamics: from wing theory to panel methods,” McGraw-Hill, New York, 1991.

[22]        Kotb, M. A., “Re-analysis of surface piercing propellers performance data,” Alexadria Engiering Journal, Vol. 44, No. 4, 2005.